Remember these pointers for your walls to have a unique ‘look’ with a various appearance by applying a glaze finish, or if you prefer, utilizing the technique of foam.
Here’s how to get a lovely texture to your walls, which can be accomplished by using a layer of colored glaze, which contrast with the base color of the surface area. In this sense, the walls must be prepared for the best possible surface area and 2 coats of matte paint are used for this.
As for the list of tools required, this reduces to a pallet, a large brush of short bristles and a smoothing brush are used, the finish is extend and colored glaze, which is obtained by adding dye to the transparent enamel.
Alto Pro painters offer these tips to provide the best surface for your walls.
Soften the enamel surface
Here we explain one of the two existing forms to use colored glaze:
- Apply the glaze: Load the pallet with colored enamel and apply the brush in all directions over a location of one square meter each time. The colored glaze will dry quickly.
- Spread the glaze: Utilize a brush brief bristles wall to extend the colored enamel. Start getting rid of most apparent marks of hair and nail and continue until it’s smooth.
- Smooth enamel: Invest the tips of the brush in all directions. To prevent paint buildup, periodically clean the bristles with a cloth.
- The colored glaze can be used with a sponge. It is a fulfilling method and barely involves problems. The tools are basic: all you require is baking enamel and a natural sponge of good quality.
- The colored glaze is the most suitable for the technique of foam paint and must be applied on a covered surface and painted eggshell or satin enamel. Depending upon the wanted result, you can use two or three colors that match the matte painting base.
The fluff strategy
The fluff strategy can be summed up in the following steps:
-
- Load the sponge: The roller tray is the most ideal for colored glaze container. Prepare the glaze in a pail and pour it into the bucket. Then collect some enamel with a sponge and press it onto the ramp to get rid of the excess paint.
- Use the glaze: Hold the sponge and use thoroughly with a mottled impact in between the background and the tones that have been applied. If the sponge ends up being overloaded and the paint begins to drip, drain the excess with a rag. When it has actually dried, seal the surface area with a coat of matte varnish.