Outdoor wood takes a beating that indoor trim never sees. A deck or fence in Keremeos gets direct sun, rain, foot traffic and whatever else the yard throws at it, and the coating slowly gives up. When the finish goes chalky, grey or patchy, it is time to act before the boards themselves start to suffer.

We take on both stain and paint for these jobs. The right choice depends on the age of the wood, how much of it you want to keep visible, and how much maintenance you are willing to do in future years.

Outdoor surfaces on the list

Deck floors, stairs, rails and spindles
Privacy fences, picket fences and gates
Pergolas, pool-side wood and garden screens
Stripping of old, failing coatings by sanding or chemical stripper where suited
Cleaning of grey weathered wood with a wood brightener
Sealing of end grain and board edges where moisture enters first

Yard work with a view of the valley

Many Keremeos properties have large yards and long fence lines, because homes here often sit on bigger lots with room for gardens and fruit trees. Length matters for pricing, so we measure every run and write the footage into the quote instead of rounding up.

Decks that face open sky and a lot of afternoon light fade fastest on the exposed top surface. We often suggest a more durable film on horizontal boards and a lighter stain on vertical railings, since each part of a deck ages differently.

Safety on a deck is worth a quick check before any coating goes on. Railings should not wobble, stair treads should not flex, and any board that gives underfoot should be fixed first. We note these on the quote but leave structural work to someone qualified. Once the wood is sound, the finish choice becomes simple. Semi-transparent stain suits a deck you want to keep looking like wood, while a solid colour suits a fence you simply want to look tidy. Either way, we leave a note of the product used so you can match it at touch-up time.

Deck and fence sequence

Test the wood. We check for rot, loose boards, popped nails and old finish type, then write what we find into the quote.
Clean and strip. The surface is washed, any failing coating is removed, and the wood is left to dry fully.
Sand and seal. Rough areas are sanded smooth, then bare wood is sealed so the finish soaks in evenly.
Apply and cure. Stain or paint goes on in the coats listed, and we mark the area so nobody walks on it before it is ready.

The full process, prep and pricing factors are on our main fence and deck painting page.

Fence and Deck Painting in Keremeos: questions

Should I stain or paint my deck?

Stain lets the grain show and is easier to refresh later. Paint hides worn boards and gives a solid colour but can peel if moisture gets under it. We help you pick based on the condition of the wood.

Can you repair a few loose boards before coating?

We can reset nails and screws as part of prep. Replacing rotten boards or posts is carpentry, which we list separately or recommend you arrange first.

How long should I stay off the deck afterwards?

Drying times depend on the product and the weather, so we give you a specific guide on the day. Light foot traffic comes first and furniture goes back last.

Other painting services in Keremeos

Fence and Deck Painting in nearby towns

To bring tired outdoor wood back in Keremeos, request a free written quote and we will measure the fence and deck first.

Request your free written quote or call (778) 760-0346.

More about fence and deck painting and Keremeos

Have a question first? Read the FAQ, learn about Alto Pro Painters or contact us.

Further reading: Keremeos on Wikipedia and Wood stain on Wikipedia.

Watch: fence and deck painting in action

How to re-stain a deck, by This Old House on YouTube.