The deck is where Kaleden households spend their summer, and it is also the surface taking the worst of it. Boards sit in direct sun for hours, then get soaked by a splashing glass, a sprinkler or a storm. Fences along a lake-view lot do a similar job with wind added. Left alone, wood greys, cups and splits, and the finish peels off in sheets.

We clean, repair and recoat decks, railings, stairs and fences around Kaleden homes. The right product depends on the state of the wood, so the written quote begins with what we find on the visit rather than a fixed package.

Work on decks and fences

Stripping of failed stain or paint where it is peeling, using methods that will not gouge the boards
Washing with a wood cleaner to lift grey fibres, mildew and ground-in dirt
Replacing or resetting popped screws, nails and the occasional damaged board
Sanding of rough railings and handrails so they are comfortable to touch
Penetrating stain or solid-colour coating, chosen to suit the age and condition of the wood
End-grain and board-edge sealing, where moisture usually gets in first

Sun, wind and why the finish matters

On the shore of Skaha Lake, the horizontal surfaces take the heaviest load. A deck board is hit by sun from above and moisture from below, so the top face dries out and the underside stays damp. Sealing both and keeping the gaps between boards clear helps. When we quote, we check the underside of stairs and rail posts, since that is where rot starts quietly.

Colour choice has a practical side. Dark stains soak up heat and can leave boards hot enough to be uncomfortable barefoot, while lighter tones stay cooler and hide the dust that settles. We can talk through the trade-off with you, including whether a transparent stain suits the wood or a solid colour will last longer on weathered boards.

A deck or fence job in four parts

Test the surface. We sprinkle water on the boards. If it beads, the old coat is still working; if it soaks in, the wood is thirsty and ready for fresh stain.
Clean and strip. Dirt, mildew and loose finish come off, and the wood is left to dry fully. Rushing this step is the commonest reason a stain fails early.
Repair and sand. Loose fixings are reset, splinters sanded smooth and any cracked pieces flagged for replacement, which we cover in the quote.
Apply and cure. The finish goes on in dry, mild conditions, in coats that suit the product. We tell you how long to stay off before furniture goes back.

The full process, prep and pricing factors are on our main fence and deck painting page.

Fence and Deck Painting in Kaleden: questions

Should I stain or paint my deck?

Stain lets the grain show and wears away gradually, which makes touch-ups easy. Paint covers old damage better but can peel if water gets under it. We help you pick based on what the boards look like now.

How soon after cleaning can you apply the finish?

The wood must be properly dry, which can take a day or more depending on weather. We check with a moisture meter or simple tests rather than going by the clock.

Do you work on fences that border a neighbour?

Yes, but we only coat the side you own or have agreement over. If both faces need doing, we suggest a quick word with your neighbour beforehand.

Other painting services in Kaleden

Fence and Deck Painting in nearby towns

Ask for a free written quote on your Kaleden deck or fence and we will tell you what the wood actually needs.

Request your free written quote or call (778) 760-0346.

More about fence and deck painting and Kaleden

Have a question first? Read the FAQ, learn about Alto Pro Painters or contact us.

Further reading: Kaleden on Wikipedia and Wood stain on Wikipedia.

Watch: fence and deck painting in action

How to re-stain a deck, by This Old House on YouTube.